How To Run Tahoe-LAFS
This is how to run a Tahoe-LAFS client or a complete Tahoe-LAFS grid. First you have to install the Tahoe-LAFS software, as documented in Installing Tahoe-LAFS.
tahoe program in your virtualenv’s
bin directory is used to
create, start, and stop nodes. Each node lives in a separate base
directory, in which there is a configuration file named
Nodes read and write files within this base directory.
A grid consists of a set of storage nodes and client nodes running the Tahoe-LAFS code. There is also an introducer node that is responsible for getting the other nodes talking to each other.
If you’re getting started we recommend you try connecting to the public test grid as you only need to create a client node. When you want to create your own grid you’ll need to create the introducer and several initial storage nodes (see the note about small grids below).
Being Introduced to a Grid
A collection of Tahoe servers is called a Grid and usually has 1 Introducer (but sometimes more, and it’s possible to run with zero). The Introducer announces which storage servers constitute the Grid and how to contact them. There is a secret “fURL” you need to know to talk to the Introducer.
One way to get this secret is using traditional tools such as encrypted email, encrypted instant-messaging, etcetera. It is important to transmit this fURL secretly as knowing it gives you access to the Grid.
An additional way to share the fURL securely is via magic wormhole. This uses a weak one-time password and a server on the internet (at wormhole.tahoe-lafs.org) to open a secure channel between two computers. In Tahoe-LAFS this functions via the commands tahoe invite and tahoe create-client –join. A person who already has access to a Grid can use tahoe invite to create one end of the magic wormhole and then transmits some JSON (including the Introducer’s secret fURL) to the other end. tahoe invite will print a one-time secret code; you must then communicate this code to the person who will join the Grid.
The other end of the magic wormhole in this case is tahoe create-client –join <one-time code>, where the person being invited types in the code they were given. Ideally, this code would be transmitted securely. It is, however, only useful exactly once. Also, it is much easier to transcribe by a human. Codes look like 7-surrender-tunnel (a short number and two words).
Running a Client
To construct a client node, run “
tahoe create-client”, which will create
~/.tahoe to be the node’s base directory. Acquire the
(see below if you are running your own introducer, or use the one from the
TestGrid page), and write it to
(see Introducer Definitions). Then use “
tahoe run ~/.tahoe”.
After that, the node should be off and running. The first thing
it will do is connect to the introducer and get itself connected to all other
nodes on the grid.
Some Grids use “magic wormhole” one-time codes to configure the basic
options. In such a case you use
tahoe create-client --join
<one-time-code> and do not have to do any of the
By default, “
tahoe create-client” creates a client-only node, that
does not offer its disk space to other nodes. To configure other behavior,
tahoe create-node” or see Configuring a Tahoe-LAFS node.
tahoe run” command above will run the node in the foreground.
tahoe --help gives a summary of all commands.
Running a Server or Introducer
To build either a storage server node, or an introducer node, you’ll need
a way for clients to connect to it. The simplest case is when the
computer is on the public internet (e.g. a “VPS” virtual private server,
with a public IP address and a DNS hostname like
How To Configure A Server for help with more complex scenarios, using the
To construct an introducer, create a new base directory for it (the name
of the directory is up to you),
cd into it, and run “
create-introducer --hostname=example.net .” (but using the hostname of
your VPS). Now run the introducer using “
tahoe run .”. After it
starts, it will write a file named
introducer.furl into the
private/ subdirectory of that base directory. This file contains the
URL the other nodes must use in order to connect to this introducer.
You can distribute your Introducer fURL securely to new clients by using
tahoe invite command. This will prepare some JSON to send to the
other side, request a magic wormhole code from
wormhole.tahoe-lafs.org and print it out to the terminal. This
one-time code should be transmitted to the user of the client, who can
tahoe create-client --join <one-time-code>.
Storage servers are created the same way:
--hostname=HOSTNAME . from a new directory. You’ll need to provide the
introducer FURL (either as a
--introducer= argument, or by editing
tahoe.cfg configuration file afterwards) to connect to the
introducer of your choice.
See Configuring a Tahoe-LAFS node for more details about how to configure Tahoe-LAFS.
A note about small grids
By default, Tahoe-LAFS ships with the configuration parameter
shares.happy set to 7. If you are using Tahoe-LAFS on a grid with
fewer than 7 storage nodes, this won’t work well for you — none of your
uploads will succeed. To fix this, see Configuring a Tahoe-LAFS node to learn how
shares.happy to a more suitable value for your grid.
Development with Docker
If you want to stand up a small local test environment, you can install
Docker and Docker Compose. Once you have cloned the repository, run
docker-compose up from the project’s root directory. This will start a
introducer, server, and a client configured to connect to them. After the
containers start, you can access the WUI by navigating to
http://localhost:3456 in your browser.
Do Stuff With It
This is how to use your Tahoe-LAFS node.
Point your web browser to http://127.0.0.1:3456 — which is the URL of the gateway running on your own local computer — to use your newly created node.
Create a new directory (with the button labelled “create a directory”). Your web browser will load the new directory. Now if you want to be able to come back to this directory later, you have to bookmark it, or otherwise save a copy of the URL. If you lose the URL to this directory, then you can never again come back to this directory.
Prefer the command-line? Run “
tahoe --help” (the same command-line
tool that is used to start and stop nodes serves to navigate and use the
decentralized file store). To get started, create a new directory and
mark it as the ‘tahoe:’ alias by running “
tahoe create-alias tahoe”.
Once you’ve done that, you can do “
tahoe ls tahoe:” and “
LOCALFILE tahoe:foo.txt” to work with your file store. The Tahoe-LAFS
CLI uses similar syntax to the well-known scp and rsync tools. See
The Tahoe-LAFS CLI commands for more details.
To backup a directory full of files and subdirectories, run “
LOCALDIRECTORY tahoe:”. This will create a new LAFS subdirectory inside the
“tahoe” LAFS directory named “Archive”, and inside “Archive”, it will create
a new subdirectory whose name is the current date and time. That newly
created subdirectory will be populated with a snapshot copy of all files and
directories currently reachable from LOCALDIRECTORY. Then
will make a link to that snapshot directory from the “tahoe” LAFS directory,
and name the link “Latest”.
tahoe backup cleverly avoids uploading any files or directories that
haven’t changed, and it also cleverly deduplicates any files or directories
that have identical contents to other files or directories that it has
previously backed-up. This means that running
tahoe backup is a nice
incremental operation that backs up your files and directories efficiently,
and if it gets interrupted (for example by a network outage, or by you
rebooting your computer during the backup, or so on), it will resume right
where it left off the next time you run
See The Tahoe-LAFS CLI commands for more information about the
command, as well as other commands.
As with the WUI (and with all current interfaces to Tahoe-LAFS), you are responsible for remembering directory capabilities yourself. If you create a new directory and lose the capability to it, then you cannot access that directory ever again.
The SFTP frontend
You can access your Tahoe-LAFS grid via any SFTP client. See
Tahoe-LAFS SFTP Frontend for how to set this up. On most Unix
platforms, you can also use SFTP to plug Tahoe-LAFS into your computer’s
local filesystem via
sshfs, but see the FAQ about performance
The SftpFrontend page on the wiki has more information about using SFTP with Tahoe-LAFS.
Want to program your Tahoe-LAFS node to do your bidding? Easy! See The Tahoe REST-ful Web API.
Bugs can be filed on the Tahoe-LAFS “Trac” instance, at https://tahoe-lafs.org/trac/ .
You can also “fork” the repo and submit Pull Requests on Github: https://github.com/tahoe-lafs/tahoe-lafs .